One and the same tool for both rotating and stationary use
The CoroMill 390 inserts are positioned a little ahead of the CoroTurn inserts – axially as well as radially – to guarantee that turning inserts are not in cut when the tool is applied rotating.
This means that turning of an available blind hole – using the CoroTurn function of the tool – must be stopped before the CoroMill 390 inserts get in contact with bottom face. |
|
| |
Tool length optimized for accessibility in multi-tasking
The tool bodies are extended by 65 mm compared with corresponding conventional tools – to allow freer use of the working positions possible in multi-tasking – without any need for extensions.
Length and design of the tool body is optimized by each Coromant Capto size to provide best accessibility relative to the most common chuck sizes. The tool is designed with all inserts positioned on the centre line of the tool, to be easy to use together with the standard program cycles in the machine tools.
|
|
|