CoroTurn 107 and CoroTurn 111 general turning inserts can be applied to fine boring operations. In a new development, CoroTurn 107 TCEX inserts, for CoroBore 825 and 391.71A fine boring heads, have been optimized* for finish boring geometries. Insert design ensures an improved chip form, allowing easier evacuation from the workpiece to preserve surface finish.
 | Improved chip form possible at low speeds and depths of cut |
 | No barriers to productivity - good surface finish achievable even at very high feeds |
 | Based on Wiper technology for good surface finish at close tolerances |
* Geometry optimized for CoroBore 825 and 391.37A is valid for size T06, T09, T11 and nose radius 0.2 mm. | |