 | CoroCut 3 is a complete solution for narrow precision grooving and circlip grooving, offering a full range of insert width options between 0.5 and 3.18 mm.
With high-performance grade GC1125 and sharp edge -GS geometry, CoroCut 3 provides unbeatable productivity in parting and grooving mass production.
|
The second choice is CoroCut with GF geometry (width 1.85–5.15 mm) giving good productivity in external operations.
| |
Internal circlip grooving
For best economy use the three edged CoroThread 254 system (width 1.10–4.15 mm) for internal operations.
For internal machining in small holes from 10 mm diameter and width 0.73–1.70 mm, the CoroCut MB is the first choice.
For holes from 4.2 mm diameter and width 0.78–1.57 mm, the CoroTurn XS can be used.
| CoroThread 254, CoroCut MB and CoroTurn XS for internal circlips. |
|
Recommended grade and cutting data
|
Starting grade for CoroThread 254 is GC1135 and for CoroCut GF grade GC1125.
Cutting speed 150 m/min and feed 0.08 mm/r. |
|
Milling of circlip grooves
For milling of circlip grooves on non-rotation products, the CoroMill 327 is the first choice from 10 mm diameter. Circlip inserts, widths 0.7–5.15 mm. Inserts for both circlip and chamfering in one operation, widths 1.1–4.15 mm.
CoroMill 328 is the choice for productive milling from 39 mm diameter. Circlip inserts, widths 1.3–5.15 mm. Inserts for both circlip and chamfering in one operation, widths 1.1–5.15 mm.
All systems have sharp edges in order to generate a good cutting process and to achieve long tool life. |
| CoroMill 327 and CoroMill 328 for milling of circlip in non-rotating components. |
|