DRILLING | |
 | CoroDrill® 880
Up to 100% higher productivity compared to conventional indexable insert drills due to step technology. Four true cutting edges with wiper geometries give a superb surface finish. Optimized chip channels accelerate chip evacuation and help avoid production stoppages. Available in diameters 12.00 to 63.5 mm.
CoroDrill 880 |  |
HARD PART FINISHING | |
 | Insert grade GC1010
Optimized for roughing to finishing, new PVD-coated GC1010 is the perfect complement to our existing grade profiles. Superior edge-line toughness, greater wear resistance and increased cutting speeds in machining of hardened steels. Can’t fail to boost productivity.
GC 1010 | |
PROFILE MILLING | |
 | CoroMill® 316
Exchangeable-head milling system for greater flexibility and better productivity plus lower tool and inventory costs. Strong cutting head/shank interface provides high strength for roughing and high rigidity for finishing. The new introduced soild carbide shank is available in all coupling sizes from 10 to 25 mm. Its higher stiffness and less deflection make it possible to machine long overhangs and deep pockets. It also gives higher accuracy in finishing operations.
CoroMill 316 | |
 | CoroMill® ball nose
CoroMill ball nose end mill is now available with integrated Coromant Capto® coupling. Coromant Capto improves the modularity of the tool and the coupling’s stiffness.
CoroMill 216 | |
FACE MILLING | |
 | CoroMill® 365
Cost-effective cutter that combines high-quality results with maximum process security in roughing to semi-finish face milling of cast iron and steel. High metal removal rates. Extra close pitch eliminates instability worries.
CoroMill 365 | |
 | CoroMill® 345
CoroMill 345 is a new generation of 45-degree face mills engineered to provide the best cost efficiency on the market. This advanced tool is designed primarily for high performance face milling with small to medium depths of cut in steel, stainless steel and cast iron.
Its versatility and far-reaching optimization possibilities make it suitable for demanding roughing operations through to mirror-finishing.
CoroMill 345 | |
SEMI FINISHING - ROUGHING | |
 | CoroMill® 300
Round insert cutter for smooth face milling, profiling and pocketing. Roughing in all material from cast iron to hardened steel. The positive cutting angles take light cuts and make it possible to get high feed rates also in weaker machines and in unstable conditions. Now also in insert size IC20 and cutters in diameters 66 - 200 mm.
CoroMill 300 | |
SHOULDER MILLING | |
 | CoroMill® 390 long edge
Versatile cutter for deep or shallow square-shoulder milling in general machining. Large product program with a wide range of diameters.
CoroMill 390 | |
 | |