Please select your country! -English -EN Settings

Settings

Please select your country!

{{group.Text}}

{{"ifind_go-back" | translate}}

{{group.Text}}

M5R90

​​​​​M5R90 – a new solution for roughing and semi-finishing of aluminium automotive parts

M5R90 – a new solution for roughing and semi-finishing of aluminium automotive parts 

Concept description

M5R90 is the first choice for roughing to semi-finishing in shoulder milling operations of automotive aluminium components such as cylinder blocks, cylinder heads, transmission housings.

The cutter works with adjustable cartridges and supports a depth of cut of up to 8 mm (0.315 inch) with a 0.4 or 0.8 mm (0.016 or 0.031 ) radius depending on used.

This cutter performs well in roughing to semi- operations, where it is possible to reach a finishing surface of 4Rz or higher. For greater demands in surface finishing, or waviness, M5B90 is more appropriate​

{{ asset.Title }}

{{ asset.Description }}

​​M5R90 – machining in aluminium cylinder head​

Features and benefits

  • The cutter body is produced in a special aluminium alloy combining low weight with high toughness
  • High density cutter is balanced with 10 000 rpm in a G2.5 class. This allows it to run at high speed without compromising the machine spindles
  • The PCD tips are brazed in a steel cartridge which allows axial adjustments
  • The PCD tips can be reground up to three times, ensuring prolonged tool life
  • Several cutting edge geometries are available

Application

  • Roughing to semi-finishing of aluminum and non-ferrous alloys
  • Cutter diameter range of 63 - 250 mm (2.48 –84 inch)
  • PCD cartridges come in four different cutting edge geometries. Depending on the cartridge used, the cutter produces a cutting depth of up to 8 mm (0.315 inch) with a 0.4 or 0.8 mm (0.016 or 0.031 inch) radius

Download of ordering codes including spare parts

Download of M5R90 folder

 
We use cookies to enhance the experience on our website. More about cookies.