Closed angles, less than 90 degrees, are a common component feature in pockets and cavities. A machine with 4 or 5 axes is needed to machine a closed angle.
Milling of a blisk impellar is one
application example of milling closed angles.
Use a 4-axis machine:
- If only one side of the pockets has a closed angle and the bottom shape is flat
Use a 5 axis machine:
- If there is a corner with closed angles on both sides
- If there is a radius at the bottom profile
How to mill closed pockets or angles
- Prior to radius machining, shoulder milling of the wall should be performed with a square end mill for best stability.
- The radius is machined with a ball nose end mill.
Use a square end mill for
best stability when machining
the peripheral wall.
The final machining of the radius
should be performed with a conical
ball nose end mill.