Please select your country! -English -EN Settings

Settings

Please select your country!

{{group.Text}}

{{"ifind_go-back" | translate}}

{{group.Text}}

CoroChuck® 930

​​

Instructions

Handling instructions: CoroChuck® 930

View and download here


{{ asset.Title }}

{{ asset.Description }}

How to set the mechanical locking

See how easy it is to increase your manufacturing safety thanks to the collet with mechanical locking interface.


Handling instructions: Collet with mechanical locking interface

View and download here


{{ asset.Title }}

{{ asset.Description }}

Instruction film: Collet with mechanical locking interface

View how to mount the collet.


Application tips

Torque wrench

Always use torque wrench 5680 099-01 for best performance and repeatability. The actuating screw shall always hit the mechanical stop, torqued with 8 Nm for S, T, P and 10 Nm for HD for best performance. If the screw does not hit the mechanical stop with recommended torque, check torque wrench status and actuating screw status.

Collets

CoroChuck® 930 can be used with or without reduction collets. For internal coolant use 393.CGS collets and for external coolant use 393.CG, 393.CF and 393.CLF


Extractor for cylindrical collets

Ordering code For collet size
5680 061-01 12 mm
5680 061-03 20 mm
5680 061-04 25 mm
5680 061-05 32 mm

Shanks

Available shank options to use with CoroChuck® 930, with and without collet, are shown in the table below.


Cylindrical

Weldon

Whistle Notch

ISO 9766
With collet
Without collet, bore size:
6, 8, 10, 12, 20 mm
Without collet, bore size:
25, 32 mm 
1, 1¼ inch 

Recommendations

Maximum run-out

P, S, HD
LF ≤ 125 mm (4.921 inch)

P, S
LF<190 mm (7.480 inch) max. run-out 7 µm
LF>190 mm (7.480 inch) max. run-out 10 µm

*) 2.5×DC and max 50 mm (1.97 inch)



Minimum torque transmission*)

Nm


Bore size

 

P

 

S

 

HD
mm 6 12 Nm 18 Nm
8 25 Nm 28 Nm
10 50 Nm 55 Nm
12 77 Nm 80 Nm
20 255 Nm 300 Nm 400 Nm
25 400 Nm 600 Nm
32 900 Nm
inch 1 295 lbf-ft
664 lbf-ft

*) Tested with h6 shank min tolerance



Clamping length min/max

Type
Bore diameter, mm
Min. mm
Max. mm
Length adjustment screw,  adjustable 10 mm (0.394 inch)
P 6 27 37 No screw
P 8 27 37 No screw
P 10 31 41 5512 066-09 (M5)
P 12 36 46 5512 066-09 (M5)
P 20 41 51 5512 066-13 (M12×1)
S,​ T 6 27 37 5512 066-09 (M5)*
S, T 8 27 37 5512 066-10 (M6)*
S, T 10 31 41 5512 066-10 (M6)*
S, T 12 36 46 5512 066-12 (M10×1)*
5512 066-11 (M8)**
S, T, HD 20 41 51 5512 066-13 (M12×1)*
5512 066-11 (M8)**
S, HD 25 47 57 5512 066-13 (M12×1)
HD 32 51 61 5512 066-13 (M12×1)
*Max.
Min.
Type
Bore diameter, inch
Min. inch
Max. inch
Length adjustment screw,
 adjustable 10 mm (0.394 inch)
S 1 1.850 inch 2.244 inch 5512 066-13 (M12×1)
HD 2.008 inch 2.401 inch 5512 066-13 (M12×1)

P = Pencil
S = Slender
HD = Heavy Duty
T = Turning

*   No screw available for Coromant Capto® C3, HA04 and T.
** Screw for BT30 and BT30 BIG-PLUS®

Always use max. clamping length in high torque applications, in combination with reduction collet, both in chuck and in collet for best performance.


Minimum torque transmission with reduction collet

 

P
Bore with reduction collet diameter, mm
4​ ​6 8​ ​10 12​ 16​ 18​ 20

Bore diameter
mm

6​ 6​ ​12
​12 ​10 ​17 ​28 ​44 ​77
​20 ​30 ​34 ​60 ​65 ​95 ​135 ​195 ​255

 

S
Bore with reduction collet diameter, mm
6 ​8 10 ​12 16​ 18 20

Bore diameter
mm

12​ 20 ​40 60​ 80​
​20 ​40 ​80 ​100 ​125 ​200 ​250 ​300

 

HD
Bore with reduction collet diameter, mm
12 ​16 18​ ​20 25​ 32​

Bore diameter
mm

20 150 ​230 290​ 370​
​25 ​200 ​350 ​420 ​530 ​600
​32 ​240 ​320 ​350 ​400 ​540 ​900


Allowed spindle speed - 7/24 Tapers

​ ​ ​

Spindle speed n (rpm)


Length L (mm)

Allowed spindle speed - HSK-A, Coromant Capto®

​ ​ ​

Spindle speed n (rpm)


Length L (mm)

Balancing according to ISO 16084 (for more information, visit the knowledge section Balancing and RPM).



Code key

930 - HA 10 - S - 20 - 068
1 2 3 4 6 7

1- Product family


2- Machine design

C Coromant Capto®
HA HSK A
HE HSK E
I ISO
IB ISO BIG-PLUS
V CAT V
VB CAT V BIG-PLUS
B MAS BT
BB MAS BT BIG-PLUS

3- Coupling size

CC C3, C4, C5, C6, C8, C10
HSK HA04, HA05, HA06, HA08 HA10,HA12
Taper B30, B40, B50, BB30, BB40, BB50
I30, I40, I50, I60, IB30, IB40, IB50
V40, V50, V60, VB40, VB50,
4- 930 version

HD HD version
S Slender version
P Pencil version

6- Bore size diameter


7- Programming length











{{"NewsLetter_Subscribe_Header" | translate}}

{{"NewsLetter_Subscribe" | translate}}

We use cookies to enhance the experience on our website. More about cookies.