Recommendations
Insert sizes: 10, 14 mm (0.394, 0.551 inch)
Oversized option |
Alignment of inserts ensures straightness
within 0.1 mm (0.004 inch) |
---|
Pitch
Coolant supply
During cutting, the chips can be prone to sticking to the cutting edge. This means that the next cutter rotation is re-cutting the chip. By equipping every insert pocket with threaded coolant holes with nozzles for high pressure coolant delivery, you can apply maximum coolant where required.
This effectively eliminates the problem for a constant cutting edge performance. Supplying cutting fluid to all the insert pockets in the long edge cutter requires high pump volumes and pressure capability.