Please select your country! -English -EN Settings

Settings

Please select your country!

{{group.Text}}

{{"ifind_go-back" | translate}}

{{group.Text}}

CoroTurn® XS

Instructions

Collet-clamped adaptor

Use the collet-clamped adaptor for rigid clamping and best performance. With increased stability, micro vibrations are minimized and longer tool life can be achieved.


Adaptors for external tool post

When the cylindrical tool positions are limited or non-existent you can use the square shank adaptors for external tool post in sliding head machines. This enables more free space and higher productivity in the machine.

Sliding head machines

Learn how to configure sliding heads machines to help you to achieve a consistent and efficient machining process.

Sliding head machines

Recommendations

Choice of tool

 

Turning (CXS-xxT…)

Turning 98º and 90º for holes down to 0.3 mm (0.012 inch).

 

Profiling (CXS-xxR…)

For holes down to 4.2 mm (0.165 inch), insert radii 0.5–1 mm (0.02–0.039 inch).

 

Grooving (CXS-xxG…)

All grooving cutting tools produce grooves with a flat bottom and sharp corner radii. For holes down to 2.0 mm (0.079 inch), insert widths: 0.5–2 mm (0.020–0.079 inch).

 

Threading (CXS-xxTH…)

Full profile tools for high quality threads in one operation. For holes down to 4.2 mm (0.165 inch). Thread forms: VP60, M60, UN60, WH55, NPT60, TR30.


 

Face grooving (CXS-xxF…)

For the most narrow grooves in the smallest diameters. Diameters from 0.2 mm (0.008 inch) and groove depths up to 30 mm (1.18 inch).

 

Pre-parting (CXS-xxGX…)

For holes down to 5.2 mm (0.205 inch).

 

Back boring (CXS-xxB…)

For holes down to 4.2 mm (0.165 inch).

 

Copying (CXS-xxTE…)

Internal copy turning for holes down to 4.2 mm (0.165 inch).


Cutting data

CoroTurn® XS programme is intended for light cutting data with depth of cut between 0.05-0.6 mm (0.002-0.024 inch) and feed between 0.01-0.05 mm (0.0004-0.0016 inch).

 

Grades

  • First choice grade for turning is the PVD coated GC1125 intended to give a longer tool life in ISO P, M, N and S materials
  • First choice grade for general machining is the PVD thin coated GC1025 intended for average cutting speed giving a reliable tool life in ISO P, M, N and S materials
  • The uncoated grade H10F is an alternative. Available for ISO N, non-ferrous materials or when an extreme sharp edge is necessary
  • For hardened steels, ISO H, use CBN grade CB7015

Geometries

  • First choice: Flat ground geometry with extremely sharp edge line
  • For optimization: Use ground A-geometry for excellent chip control and to avoid chip jamming in small holes


{{"NewsLetter_Subscribe_Header" | translate}}

{{"NewsLetter_Subscribe" | translate}}

We use cookies to enhance the experience on our website. More about cookies.