CoroReamer® 830 is a modular designed tool with replaceable cutting head, easy to change while still in the machine tool spindle. The cutting head is located in the holder by a precision made tapered coupling for highest concentricity and repeatability with a radial run-out of 3µm (120µinch)
Benefits
- High surface finish and operation security
- High penetration rate
- Fast and easy head change with high accuracy < 3µm (120µinch)
Features
- Boring range: 10–31.75 mm (0.394-1.250 inch)
- Achievable hole tolerance: H7
- Brazed cermet inserts in grade P10R
- Effective chip evacuation by directing cutting fluid at each edge
- Short and long shank options
- Head change
Application
- For steel, nodular cast iron and malleable cast iron materials
- Through holes, angled surface and cross hole
ISO application area
Head change
Clamping and releasing of the cutting head is carried out by turning the clamping mechanism only a quarter of a turn using a hexagonal key.
CoroReamer® 435
Micro-grained carbide for high hardness and toughness DIN 65535 HA shank to H6 tolerance... chevron_right
CoroReamer® 835
Micro-grained carbide for high hardness and toughness DIN 65535 HA shank to H6 tolerance... chevron_right
CoroDrill® 430
Complex multi-step form drills with a diameter range of 3-25 mm, up to 8x Straight... chevron_right
CoroDrill® 860
Best process security on the market Can be reconditioned to its original specification Broad... chevron_right
