Sandvik Coromant logo
  • close
  • Productschevron_right
  • Learningchevron_right
  • Manufacturing solutionschevron_right
  • Supportchevron_right
  • chevron_left Back
    close
  • chevron_left Back
    close
  • chevron_left Back
    close
account_circleshopping_cart
menu

CoroMill® MF80

For secure face and shoulder milling in close to 90-degree operations with fixture constraints

Performance test, ISO K

ComponentCarrier and supports
MaterialGJS400 / K3.1.C.UT
OperationRoughing
MachineMETRO-N-LINEA / ISO50 DIN 69871

+54%

Tool life


mf80-success-stories2.jpg
mf80-success-stories3.jpg
Tool
-
MF80-R080Q27-13H
Insert-
MF80-130508 M-M50 3330
zn80/5
80/4
n, rpm1000
1000
vc m/min (ft/min)
250
250
hex mm (inch)-
-
fz mm/z (in/z)0.24
0.3
vf, mm/min (in/min)1200
1200
ap mm (inch)2-3
2-3
ae mm (inch)20-80
20-80
Tool life, components55 min, 10 components
82 min, 15 components

Performance test, ISO P

ComponentPump and valve
MaterialISO P (Din1.0619) / P1.5.C.UT
OperationRough shoulder milling
MachineHELLER H6000 HMC (HSK100)

+67%

Tool life

+60%

Productivity


mf80-success-stories5.jpg
mf80-success-stories6.jpg
Tool
-
MF80-R080Q27-13H
Insert-
MF80-130508 M-M50 4330
zn80/5
80/8
n, rpm500
500
vc m/min (ft/min)
125
125
hex mm (inch)-
-
fz mm/z (in/z)0.15
0.15
vf, mm/min (in/min)375
600
ap mm (inch)5
5
ae mm (inch)15/50
15/50
Tool life, components9 components
15 components

Result: After 40 minutes of machining time, only chipping wear was visible. The shim protection and the high number of insert edges can lower the cost-per-part in roughing.

account_circle
Create account chevron_right

Place orders, view prices and check tool availability

mail
Subscribe to our newsletter chevron_right

Join us. Stay updated.