CoroCut® 1-2
Versatile parting and grooving
Versatile parting and grooving
With more than 700 standard inserts, CoroCut 1-2 covers all parting and grooving applications in most materials, from standardized grooves to parting off and profiling in heat resistant super alloys.
Cost efficiency with two edges
The two-edge inserts are firmly positioned in the railed insert seat giving cost-efficiency and stable performance.
Secure and efficient machining
In grooving, chips easily get stuck in the curved groove, leading to insert breakage. CoroCut 1-2 tools with precision coolant securely evacuate the chips for an undisrupted machining process.
Application
- Parting, external grooving, face grooving, internal grooving, profiling and hard part turning
- Roughing to finishing
In parting off and external grooving CoroCut® 1-2 is a cost-efficient solution to depths where the 2-edged inserts can be used.
Product variants
Tool holding
- Coromant Capto®, VDI, and HSK-T for connecting QS shanks and parting blades in turning centres
- QS™ stops for connecting QS shanks and swiss tools, machine specific adaptors
- Rectangular shanks and boring bars
Plug and play adaptors for easy coolant connection
CoroTurn SL blades
CoroTurn SL cutting blades enable a wide range of tool combinations from a small inventory of adaptors and cutting heads.
Insert geometries
- Parting off: -CF; -CM; -CR; -CS
- Grooving and side turning: -TF; -TM
- Grooving: -GF;-GM; -GR
- Profiling: -RO; -RM; -RE
- WIPER: -CF; -TF
- Hart part turning: -XB
Insert grades
- PVD: GC1105; GC1125; GC1145
- CVD: GC1135; GC4325; S205; CG3115
- CBN: CB7015, CB7025, CB7105 and CB7115
- PCD: CD10
- Ceramic: CC6220
- Uncoated: H13A; H10F
Highlights
Access with angled inserts
Angled inserts are perfectly formed for those difficult-to-access grooves in e.g. the turbine disc eliminating the need for special tools.
Hard part turning with CoroCut 1-2
The new –XB geometry for hard part turning can operate at very high feed rates, up to 1.2 mm/rev (0.047 in/rev) without compromising surface finish.
Seal fin grooving
Generating small radii profiles with correct profile width puts high demands on a robust tooling solution. CoroCut 1-2 for seal fin grooving is available in insert width 1.5 and 2 mm (0.059 and 0.079 inch).
Join us. Stay updated.
Sign up for our newsletter today
Sandvik Coromant UK
+44 (0)121 368 0305