Tools for sliding head machines
In the realm of precision engineering, mastering the production of thousands of intricate parts demands more than just skill—it requires the right tools for the job. Our extensive selection of tooling options is meticulously crafted to enhance the capabilities of sliding head machines, ensuring optimal performance and efficiency. From intricate components to complex projects, our comprehensive range empowers you to tackle every manufacturing challenge with precision and ease, maximizing your productivity and success in the competitive market of sliding head machining.
Tooling systems
QS™ Micro holding system
- Quick-change, modular tooling system for sliding head machines
- Easy-to-connect through coolant functionality
- Cutting heads for general turning, parting and grooving, and threading
QS™ holding system
- Quick change swiss shank system for sliding head machines
- Available with precision coolant, which improves chip control, tool life and component quality
External turning
CoroTurn® 107
- Turning and profiling
- Diameter: 6–40 mm (0.236–1.57 inch)
- RE ≥0.02 mm (0.0008 inch)
CoroCut® XS
- Turning, profiling and back turning
- Diameter: 1–8 mm (0.040–0.315 inch)
- RE ≥0.03 mm (0.001 inch)
Parting off
CoroCut® 2
- Diameter: 12–32 mm (0.5–1.25 inch)
- Cutting width: ≥1.5mm (0.06 inch)
CoroCut® XS
- Diameter: <8 mm (0.315 inch)
- Cutting width: ≥0.7 mm (0.03 inch)
CoroCut® 3
- Diameter: 6–12 mm (0.24–0.5 inch)
- Cutting width: ≥1 mm (0.04 inch)
CoroCut® 1-2
- Diameter: 12–32 mm (0.5–1.25 inch)
- Cutting width: ≥1.5 mm (0.06 inch)
CoroCut® QD
- Diameter: ≥20 mm (0.79 inch)
- Cutting width: ≥1 mm (0.04 inch)
External grooving
CoroCut® 2
- Diameter: 12–32 mm (0.5–1.25 inch)
- Cutting width: ≥1.5mm (0.06 inch)
CoroCut® XS
- Max. cutting depth: 1.3–3.7 mm (0.05–0.15 inch)
- Cutting width: 0.5–2.5 mm (0.02–0.098 inch)
CoroCut® 3
- Max. cutting depth: 3–6 mm (0.12–0.24 inch)
- Cutting width: 0.5–3.18 mm (0.02–0.12 inch)
CoroCut® 1-2
- Max. cutting depth: 6–16 mm (0.24–0.63 inch)
- Cutting width: 1.5–3 mm (0.06–0.13 inch)
CoroCut® QD
- Max. cutting depth: >16 mm (0.63 inch)
- Cutting width: 1–3 mm (0.04–0.12 inch)
External threading
CoroThread® 266
- Most thread forms
- Multi- or single-point profiles
- Diameter: 8–40 mm (0.315–1.57 inch)
CoroCut® XS
- Thread forms: M, UN, NPT, WH, V-profile
- Diameter: 1–8 mm (0.040–0.315 inch)
Internal turning
CoroTurn® XS
- Turning, profiling, back boring
- Min. hole diameter: 0.3 mm (0.012 inch)
CoroTurn® 107
- Turning, profiling
- Min hole diameter: 6 mm (0.236 inch)
CoroCut® MB
- Turning, profiling, back boring
- Min. hole diameter: 10 mm (0.394 inch)
Internal grooving
CoroTurn® XS
- Max. cutting depth: 2.5 mm (0.100 inch)
- Cutting width 0.78 mm (0.031 inch)
- Min. hole diameter: 4.2 mm (0.165 inch)
CoroCut® MB
- Max. cutting depth: 8 mm (0.315 inch)
- Cutting width: 0.73 mm (0.029 inch)
- Min. hole diameter: 10 mm (0.394 inch)
Internal threading
CoroThread® 266
- Pitch: 0.5–8 mm (32–3 threads/in)
- Min. hole diameter: 12 mm (0.472 inch)
- Thread forms: M, UN, WH, PT, NT, NF, RN, MJ, UNJ, TR, AC, SA
CoroTurn® XS
- Pitches: 0.5–3 mm (32–16 threads/in)
- Min. hole diameter: 4mm (0.157 inch)
- Thread forms: M, UN, WH, NPT, TR and V-forms
CoroCut® MB
- Pitches: 0.5–3 mm (32–8 threads/in)
- Min. hole diameter: 10 mm (0.394 inch)
- Thread forms: M, UN, NPT, TR, AC, SA
T-max® U-lock
Face grooving
CoroTurn® XS
- Min. hole diameter: 6mm (0.24 inch)
- Max. cutting depth: 2–30 mm (0.08–1.18 inch)
- Cutting width: 1–5 mm (0.04–0.2 inch)
CoroCut® MB
- Min. groove diameter: 12 mm (0.47 inch)
- Max. cutting depth: 1.5–10 mm (0.06–0.394 inch)
- Cutting width: 1–4 mm (0.04–1.57 inch)
Chamfer milling
CoroMill® Plura
- Chamfer angles: 45° and 60°
- Convex workpiece chamfer radii: 0.5–6.0 mm (0.020–0.236 inch)
CoroMill® 316
- Chamfer angles: 15°, 30°, 45°, 49° and 60°
- Convex workpiece chamfer radii: 1.5–8.0 mm (0.059–0.315 inch)
CoroMill® 326
- Chamfer angle: 45°
- Min. hole diameter: 5.8 mm (0.228 inch)
Face milling
CoroMill® Plura
- High feed face milling cutters
- Milling cutter diameter: 4–20 mm (0.157–0.787 inch)
CoroMill® 316
- High feed face milling cutters
- Milling cutter diameter: 10–25 mm (0.375–1.00 inch)
CoroMill® 327
- Milling cutter diameter: 20–32 mm (0.75–1.25 inch)
CoroMill® 490
- Milling cutter diameter: 20–32 mm (0.75–1.25 inch)
Slot milling
Drilling
Thread milling
Tapping
CoroTap® -K
Thread whirling
CoroMill® 325
- Screw diameter: 3–10 mm (0.118–0.394 inch)
- Thread forms: HA and HB
Highlights
Catalogue: Tools for sliding head machines
This catalogue guides you through our comprehensive range of precision tools for machining small parts in sliding head machines.
Maximized machine utilization
QS™ holding system is a quick change system developed specifically for sliding head machines. The system of tool holders, stops and wedges offer stable tool clamping and secure insert edge position for good repeatability and accuracy.
Medical solutions
Machining medical implants requires tools that meet very high technical demands. We offer a large range of advanced tooling and machining solutions for medical devices. They are able to meet exact specifications, even with difficult materials.
How to get the best machining result
Tool and cutting data recommendations
Struggling to find the right tool for the job? CoroPlus® Tool Guide offers quick and accurate tool recommendations on all your digital devices.
Find the right QS™ wedge
Do you need help finding a suitable QS™ wedge for your sliding head machine? Find the correct tooling combination of wedge and holder depending on machine tool brand and model.
Knowledge through e-learning
Want to know how to improve productivity and use the tools? Learn the fundamentals in metal cutting by using our e-learning programme.
Machine configurations
Get tips on how to configure your sliding head machine and other good to know information when it comes to this machine type.
Micro drills
Solid carbide and polycrystalline diamond (PCD) micro drills ideal for precision machining in small parts
How to use Coromant EH
Get tips on torque, usage area and other valuable information related to modular system Coromant EH.
Tools for Sliding Head Machines
In the machining industry, precision is critical, especially when working with sliding head machines or CNC sliding head lathes. Our comprehensive range of tools for sliding head machines is designed to deliver optimal performance for producing precision components in industries such as automotive and medical. Whether you're turning, parting, grooving, or profiling, our tool holders and tool post solutions enhance productivity and ensure efficient machining.
QS™ Holding System and QS™ Micro Holding System
Both the QS™ holding system and the QS™ Micro holding system are optimized for sliding head lathes, providing quick-change capability, through-coolant functionality, and stable clamping for better tool life and chip control. These systems help you achieve precision in turning, grooving, and threading operations. The QS™ Micro holding system is particularly suited for micro-scale precision components, ensuring maximum accuracy.
Our tool holders are designed to minimize downtime and improve your sliding head machine's performance, making them an ideal investment for companies aiming to increase production and improve productivity.
Join us. Stay updated.
Sign up for our newsletter today
Sandvik Coromant UK
+44 (0)121 368 0305