-English (US) -EN Settings

Settings

Please select your country!

{{group.Text}}

{{"ifind_go-back" | translate}}

{{group.Text}}

Solutions for cost-effective and high-quality machining of aerospace fan casings

Solutions for cost-effective and high-quality machining of aerospace fan casings

The machinability of titanium is low; however, unlike with nickel alloys, ceramic cannot be applied. This poses challenges for productively removing material. Keeping the cutting temperature low is the key to success. The key factors, together with optimized programming, are the choice of insert shape and utilization of high-pressure coolant (HPC).


Tooling solutions for aerospace fan casings

CoroTurn® SL70 – The flexible modular tooling system

Round inserts offer best accessibility and productivity due to reduced entry angle and chip thickness. The program consists of round carbide inserts as well as the stable CoroCut® grooving system, and comes with HPC as standard.

  • Radial and axial clearance requirements are covered in the compact program
  • Oval coupling offers excellent stability and accessibility
  • Coromant Capto® size C6 for multi-task and VTL requirements

Read more about CoroTurn® SL70

CoroTurn® SL70

CoroTurn® HP – Advanced cooling technology

The CoroTurn® HP program consists of a full range of tool holders with advanced cooling technology. The fixed nozzles in the tool holder promise improved chip control, process security and high productivity due to jets perfectly directed at the cutting zone. In combination with dedicated insert geometries for high pressure coolant, the performance in terms of tool life can be increased.

VTLs by design need to have either manual quick change or automatic tool change. With the coolant piped through the ram directly to the spindle, there are no coolant pressure restrictions, as is the case with turret lathes and rotating spindles.

Coromant Capto® jetbreak, developed for UHPC applications in VTLs, has been applied for many years, predominantly in titanium casing, disc and spool applications. Much of the design and application knowledge developed in this field lie behind the now-standard CoroTurn® HP program for HPC.

Read more about CoroTurn® HP

CoroMill® Plura HFS

Xcel in titanium

A radical tooling solution for semi-rough turning into shoulders. Xcel combines the advantages of a square 45-degree lead approach angle and rhomboid 90-degree lead angle tools.

  • Rhomboid – Accessibility into confined spaces and machining in two directions with easy tool offset
  • Square – High feed rate and long tool life
  • Xcel reduces the lead angle and chip thickness, allowing for an increase in feed and speed
  • Double the metal removal rate and double the tool life at the same time!

{{ asset.Title }}

{{ asset.Description }}

CoroMill® Plura HFS – Solid carbide end mill for high-feed side milling

Utilize the new CoroMill® Plura HFS families for reliable and productive milling. The optimized grade for nickel-based alloys has sharp, controlled cutting edges, providing long and predictable tool life along with high metal removal rates.

Read more about CoroMill® Plura HFS

CoroMill® Plura HFS

CoroMill® Plura – Finish bore with CoroMill® Plura end mill

Circular interpolation is a fast and secure method; one tool can finish a wide range of hole diameters, reducing tool inventory.

CoroMill® Plura is a range of high-quality solid carbide end mills that offer productive, efficient and perfectly reliable milling solutions.

Learn more about CoroMill® Plura

CoroMill® Plura


CoroMill® Plura thread mills and CoroTap® – For reliable threading and tapping

The new threading and tapping solutions for nickel-based alloys provide excellent process security on high-value components.

Learn more about CoroMill® Plura thread mills

CoroTap® – A complete tapping program

CoroMill® Plura thread mills


CoroMill® 300 – Light-cutting face and profile milling cutters

Helical ramping of larger diameter holes with CoroMill® 300 provides the most secure and productive method. The cutting forces are much lower than in drilling, which is challenging when dealing with the interrupted exit into the bore.

For rough milling around a boss, use CoroMill® 300 with a roll-in program combined with round inserts to reduce notch wear and allow for high feed rates.

Learn more about CoroMill® 300

CoroMill® 300


CoroDrill® 846 – Optimized drilling in heat resistant super alloys

The latest development in solid carbide drill technology with geometry optimized for HRSA offers a high number of drilled holes with security and low axial cutting forces.

Learn more about CoroDrill® 846

CoroDrill® 846


CoroTurn® XS – Internal machining of small, high-quality features

CoroTurn® XS is a system for solid carbide tools designed for exact cutting edge positions, enabling high precision and repeatability in turning machining.

This tool replaces inflexible special tools and can even be used for all deburring—not just holes.

Learn more about CoroTurn® XS

CoroTurn® XS


Grade GC1105 – Designed for the challenge of super-alloy machining

GC1105 provides secure, reliable, quality machining, even flank wear and true versatility in all application areas.

  • Reliability in intermediate stage machining through superior notch wear resistance in combination with good edge line toughness.
  • Guaranteed accurate, high-quality performance in last stage machining provided by our razor-sharp, ground inserts and our state-of-the-art thin coating with excellent adhesion.

Learn more about Grade GC1105

Grade GC1105


CoroCut® angled inserts

Designed specifically for reaching difficult-to-access grooves and pockets in complex components.

CoroCut® angled inserts PDF brochure for download

CoroCut® angled inserts


Ceramic turning

Ceramic grades CC6220 and CC6230 are designed specifically for the challenges of new HRSA materials, where whisker ceramics and SiAlONs fall short, and are capable of higher cutting speeds, contributing to reduced cost per component. For high metal removal rates in pocketing and profiling applications, choose grade CC6160.

Ceramic grades CC6220 and CC6230

Ceramic grade CC6160

Ceramic turning

 
We use cookies to enhance the experience on our website. More about cookies.