-English (US) -EN Settings

Settings

Please select your country!

{{group.Text}}

{{"ifind_go-back" | translate}}

{{group.Text}}

Safety information
 

Safety information

 

 

Mechanical/physical hazards

  • Cutting tools and holders may fragment in use
  • Metal chips can be very hot with sharp edges and should not be removed by hand. Chips can cause burns to the skin and damage to the eyes
  • To ensure a safe job environment, make sure the insert and component are correctly secured in their holder before use to prevent them coming loose during the operation. Too much overhang can result in vibration and lead to tool damage/breakage and/or components with undesired dimensions
  • Always wear appropriate personal protective equipment at all times, and ensure all machine guards and safety interlocks are in place prior to and during the operation for machining safety
  • DO NOT USE any tool or product that shows signs of damage. Return the product to the appropriate location for repair, replacement or recycling
  • Use all appropriate safety guards or machine encapsulations to securely collect particles such as chips or cutting elements that may spin off
  • For rough operations, large depths of cut or when machining large diameters - make sure that the machine has the required torque and power
  • At high RPMs, the weight of the insert and clamping elements increase, which can affect the clamping arrangement. It is recommended that all high-speed manufacturing takes place only in a well-protected machine set-up. Before mounting the insert, make sure that the insert and its seat are in perfect condition and free from burrs or any particles, which may seriously affect the clamping arrangement. Always use the correct clamping force when tightening the screw. Note: A 19 gram insert weighs 350 kg at 37,500 rpm
 

Dust and fume hazards

Hard metal products and tools should not be reground or sharpened without taking appropriate safety measures to prevent exposure to dust (e.g. ventilation and personal protection equipment). Operations such as grinding, cutting, burning and welding of hard metal products may produce dust or fumes, which can be inhaled, swallowed or come in contact with the skin and eyes. Dust may cause inflammation of the airways and irritate the nose, throat, skin and eyes. Repeatedly inhaling high levels of hard metal dust has been reported to cause hard metal disease (interstitial lung fibrosis). In a two-year study on rats and mice, inhalation of cobalt was shown to cause cancer.

 

Sensitizing hazards

Prolonged skin contact with uncoated hard metals may cause an allergic skin reaction. Handle hard metal products and tools in a way that avoids direct skin contact, or use gloves for a safe job environment. Cobalt and hard metal are known sensitizers, having the potential to cause allergies through repeated exposure. A sensitized person could react with asthmatic symptoms or eczema.

Prior to using the product, always review and understand the Safety Data Sheet or Safety Information Sheet for that particular product.

 

Preventive measures

  • Avoid formation and inhalation of dust. Use adequate local exhaust ventilation to keep personal exposure below the nationally allowed limits
  • If ventilation is not available or adequate, use nationally approved respirators
  • Avoid skin contact. Wear suitable gloves. Wash skin thoroughly after handling
  • Use suitable protective clothing. Launder clothing as needed
  • Do not eat, drink, or smoke in the working area. Wash skin thoroughly before eating, drinking or smoking
  • Use safety goggles or glasses with side shields when necessary
  • Always wear appropriate safety equipment
  • For machining safety, only operate equipment when all necessary guards, interlocks and other safety devices are in place and functional
  • DO NOT use or operate damaged tools or products
 
 
We use cookies to enhance the experience on our website. More about cookies.