CoroMill® MF80
For secure face and shoulder milling in close to 90-degree operations with fixture constraints
Cost efficient in ~90˚ operations
Lightweight cutter body with shim protection ensuring secure, vibration-free cutting, as well as more cost-efficient production in close to 90-degree operations with fixture constraints.
Greater machine utilization and predictability
Inserts are equipped with eight cutting edges and optimized geometry for a longer tool life and light cutting action.
Application area
- Cost-efficient face milling applications where traditionally a multi-edge or tangential milling solution is used
- Cost-efficient shoulder milling applications where true 90-degree corner and repeated shoulder milling is not the primary demand
- Thin-walled components where low axial forces are required
- Components and machine setups with limited stability
- Automotive (engine and housing components) roughing applications
- General engineering roughing and semi-roughing applications
- ISO K, ISO P face and shoulder milling applications
Product range
Cutter body
- Diameter range: 50–125 mm (2.000–5.000 inch)
- Arbor mounting and Coromant Capto® C5 cutter bodies
- Lightweight design
- Shim protection
- Internal coolant
- Close pitch (H), coarse pitch (M)
- Also available as an engineered solution
Inserts
- Insert IC size: 13 mm
- Entering angle (KAPR): ~ 89.5°
- Maximum depth of cut (APMX): 9.0 mm
- Corner radius (RE): 0.8 mm
- Wiper edge length (BS) land: 1.6 mm
Highlights
Demo film: CoroMill® MF80 in action
CoroMill® MF80 for secure face and shoulder milling in close to 90-degree operations with fixture constraints. Watch the demo film to see it in action.
All about CoroMill® MF80 in one place
Download the brochure for a better visual overview of the product.
Metal cutting knowledge: Milling
This section covers application knowledge and tips for various milling operations. Brush up on your face and shoulder milling knowledge here.
Join us. Stay updated.
Sign up for our newsletter today
Sandvik Coromant US - Mebane, NC
+1-800-Sandvik