CoroTurn® XS

Turning (CXS-xxT…)

Turning 98º and 90º for holes down to 0.3 mm (0.012 inch).

Profiling (CXS-xxR…)

For holes down to 4.2 mm (0.165 inch), insert radii 0.5–1 mm (0.02–0.039 inch).

Grooving (CXS-xxG…)

All grooving cutting tools produce grooves with flat bottoms and sharp corner radii. For holes down to 2.0 mm (0.079 inch), insert widths: 0.5–2 mm (0.020–0.079 inch).

Threading (CXS-xxTH…)

Full profile tools for high-quality threads in one operation. For holes down to 4.2 mm (0.165 inch). Thread forms: VP60, M60, UN60, WH55, NPT60, TR30.

Face grooving (CXS-xxF…)

For the narrowest grooves in the smallest diameters. Diameters from 0.2 mm (0.008 inch) and groove depths up to 30 mm (1.18 inch).

Pre-parting (CXS-xxGX…)

For holes down to 5.2 mm (0.205 inch).

Back boring (CXS-xxB…)

For holes down to 4.2 mm (0.165 inch).

Copying (CXS-xxTE…)

Internal copy turning for holes down to 4.2 mm (0.165 inch).

Grades

• First-choice grade for turning is the PVD-coated GC1125 intended to give longer tool life in ISO P, M, N and S materials
• First-choice grade for general machining is the thin PVD-coated GC1025 intended for average cutting speeds, giving reliable tool life in ISO P, M, N and S materials
• The uncoated grade H10F is an alternative. Available for ISO N, non-ferrous materials or when an extreme sharp edge is necessary
• For hardened steels, ISO H, use CBN grade CB7014​

Geometries

• First choice: Flat ground geometry with extremely sharp edge line
• For optimization: Use ground A-geometry for excellent chip control and to avoid chip jamming in small holes
  ​
  ​