Versatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.
Benefits
- Three cutting edges for productivity
- Chamfering and back-chamfering of holes with one tool
- Very high precision and low cutting forces
- Same tool for different pitches
- One grade for all materials
Features
- Partial thread profiles for flexibility
- Small diameter tools, down to 5.8 mm (0.228 inch)
- Long reach, up to 35 mm (1.378 inch)
Application
- Internal thread milling
- Chamfer milling
- Hole diameters from 6 mm (0.236 inch)
ISO application area
Start by selecting one or more products
먼저 하나 이상의 제품을 선택하십시오
Recommendations
Use with CoroChuck 930 for best stability and precision. Always use with cylindrical collets for CoroChuck 930.
Product Range
Tool diameter mm (inch)
- Internal thread milling tools: 5.8, 7.8 (0.228, 0.307)
- Chamfering tools: 5.8, 7.8 (0.228, 0.307)
CoroMill 328 개요
CoroMill 328은 홈가공, 나사밀링, 서클립 홈가공에 사용되는 다목적 커터의 특성과 적용 범위를 설명합니다. chevron_right
CoroMill 329 컷터
CoroMill 329은 그루브 밀링의 속도와 생산성을 증대시키는 컷터입니다. chevron_right
CoroMill 495
CoroMill 495 offers versatile chamfering for multiple materials efficiently. chevron_right
CoroMill 볼 노즈 가공
CoroMill 볼 노즈 커터는 정밀한 마무리 밀링에 사용됩니다. chevron_right
